Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of QR Resin QR-1235-FR R - (PC+ABS) - LyondellBasell Industries

Material Data Center offers the following functions for QR Resin QR-1235-FR R:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other QR Resin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 35 g/10min ASTM D 1238
Temperatura 260 °C -
Carico 5 kg -
Ritiro di stampaggio, parallelo 0.005 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 62.1 MPa ASTM D 638
Modulo a flessione 2650 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 430 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 1.5 mm -
DTUL a 66 psi 102 °C ASTM D 648
DTUL a 264 psi 93.3 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Densità 1180 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 93 °C -
Pre-essiccamento - Tempo 3 - 6 h -
Temperatura di fusione 249 - 282 °C -
Temperatura dello stampo 60 - 82 °C -
Zona 1 254 - 266 °C -
Zona 2 221 - 271 °C -
Zona 3 238 - 282 °C -
Temperatura dell ugello 277 - 299 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet, Colore naturale
Additivi
Agente di distacco
Caratteristiche speciali
Ritardante di fiamma, Stabilizzato o stabile al calore
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.